HST 640 DB Blowing Dust Test Chamber
Description
Features
Specification
Models
Quick Quote
Description
Product Overview
The HST 640 DB Blowing Dust Test Chamber is made for the simulation of dust and sand conditions in a controlled atmosphere.
In general, these chambers are made to perform per the following standards:
- IEC-60529
- DIN-40050 IP5X & IP6X
- SAE-J575
- ISO-20653
- IEC-60068-2-68
- MIL-STD-810F
Please specify the correct standards when requesting information on the various Dust Chambers available from Hastest Solutions.
These chambers are used in particular for evaluating the effects of dust-laden environments per the above standards. They are utilized in several industries and applications such as Military & Defense, Automotive, Computer Systems, Optics and Displays, Materiel, Coatings, Solar Energy, etc.
Key Features
- Interior of Chamber is specially made from non-magnetic stainless steel
- The Dust collection section is located just below the test compartment.
- The air velocity for the generation of dust is controlled by a dust blowing mechanism that includes a Motor/Blower combination
- A viewing window with a manually controlled wiper is included in all standard models.
- One standard shelf for placing test specimens is included. Additional options are available.
Features
- Interior of Chamber is specially made from non-magnetic stainless steel
- The Dust collection section is located just below the test compartment.
- The air velocity for the generation of dust is controlled by a dust blowing mechanism that includes a Motor/Blower combination
- A viewing window with a manually controlled wiper is included in all standard models.
- One standard shelf for placing test specimens is included. Additional options are available.
- Temperature Control & Display Unit
- Humidity Control & Display Unit
- Wind Speed Control & Display Unit
- Dust Concentration Control & Display Unit
- Data Monitoring & Recording for Temperature, Humidity, Wind and Dust. Concentration data can be monitored and recorded in real time. The saved data can be later displayed and printed.
- High pressure circle air fan & Wind speed (1.0 to 10 m/s) generator attached with wind speed adjustor.
- Dust Adjustment Device to adjust dust volume
- Automatic dry air handling system (does not include compressed air)
- Manually rotatable 300mm table for moving test specimens inside the dust chamber
Specification
| Specification | Specification in US | Specification in Metric |
|---|---|---|
| Temperature Range | +73.4 °F to +158 °F | +23 °C to +70 °C |
| Humidity Range | <30% RH | <30% RH |
| Air Speed | 1.0 to 10.0 m/s | 1.0 to 10.0 m/s |
| Dust Consistency Range | 3.0 to 17.6 g/m³ (min.)(17.6 ± 7 g/m³) | 3.0 to 17.6 g/m³ (min.)(17.6 ± 7 g/m³) |
| Interior Dimension | 39.4W x 31.5H x 31.5D IN | 1000W x 800H x 800D mm |
| Exterior Dimension | 165W x 86.6H x 63D IN | 4200W x 2200H x 1600D mm |
| Door | 43.3 x 35.4 IN | 1100 x 900 mm |
| Observation Window | 23.6 x 23.6 IN | 600 x 600 mm |
| Power Sources | 440VAC/60Hz/70A/45KW | 440VAC/60Hz/70A/45KW |
Models
Not Available
Quick Quote
